Re: HL7 Standards Process (was RE: EDIINT and HIPAA)

[Gunther Schadow <gunther@xxxxxxxxxxxxxxxxxxxxxx>]

Dick,

yes, I think that the HL7 and HIPAA profiles would be similar if not the 
same. My goal is to get all the healthcare standards together (in fact
it is only two of them, HL7 and NCPDP, since X12 is covered already) and
develop one profile with options to account for the specific EDI payload
used. We have an AS#1 profile already for HL7 and I'd like to take this
to go over a couple of issues that we found. As much as I can see why
AS#2 is very useful, I would not want to throw out the AS#1/email option
if not absolutely necessary. You mention ebXML -- we have some interest
in ebXML but we're not sure if any of this is ready for prime time, but
would like to get your thoughts on this.

regards
-Gunther


Dick Brooks wrote:
> 
> Kepa,
> 
> > Are you volunteering to create an interoperability profile for digital
> > signatures of the HIPAA standard transactions ?
> 
> My offer to assist in the development of an interoperability profile was in
> response to a need identified within HL7. However, I would be willing to
> help the HIPAA folks create an interoperability profile, provided it's based
> on a technology that I'm familiar with (e.g. EDIINT AS2, GISB EDM, ebXML).
> 
> I would hope the investment in developing an interoperability profile for
> HL7 could be leveraged in other areas (e.g. HIPAA, ASTM), without any
> additional work. Do you see HIPAA's requirements being significantly
> different enough from HL7 to require a separate interoperability profile?
> 
> Thanks,
> 
> Dick Brooks
> Group 8760
> 110 12th Street North
> Birmingham, AL 35203
> dick@xxxxxxxx
> 205-250-8053
> Fax: 205-250-8057
> http://www.8760.com/
> 
> InsideAgent - Empowering e-commerce solutions
> 
> > -----Original Message-----
> > From: Kepa Zubeldia [mailto:Kepa.Zubeldia@xxxxxxxxxxx]
> > Sent: Monday, November 20, 2000 6:13 PM
> > To: Dick Brooks
> > Cc: Rishel,Wes; Gunther Schadow; Rik Drummond; CLEM; Gary Crough; Beth
> > Morrow; David@Drummondgroup. Com; GISB1@xxxxxxx; ietf-ediint@xxxxxxx
> > Subject: Re: HL7 Standards Process (was RE: EDIINT and HIPAA)
> >
> >
> > Dick,
> >
> > Are you volunteering to create an interoperability profile for digital
> > signatures of the HIPAA standard transactions ?  X12, NCPDP, and X12+HL7
> > (in which the signature could be on the HL7 or on the X12 components)
> > are the immediate needs.  However, keep in mind that NCPDP could also be
> > in EDIFACT syntax (e.g. prescriptions) and HL7 could be in different
> > syntaxes.  But, for HIPAA purposes, at this time we need something for
> > the 275 attachment only.  Other HL7 messages could come later through
> > other interoperability profiles.
> >
> > If we have a very narrow scope (HIPAA transactions as they were released
> > in the Final Rule, plus attachments as we know them) then it is possible
> > to get an agreement, even if there is not yet an agreement on other
> > issues or on PKI issues.
> >
> > Other volunteers ?
> >
> > Kepa
> >
> > Dick Brooks wrote:
> > >
> > > Thanks Wes.
> > >
> > > Based on your description I would anticipate the EDIINT AS2
> > spec taking the
> > > "Recommendation" route, IF the group decides to go forward. Do
> > you see it
> > > the same way?
> > >
> > > FYI - other groups that have adopted AS2 have found it
> > necessary to define
> > > "interoperability profiles". These profiles identify the exact set of
> > > "options" from AS2 that everyone in the "trading community" agrees to
> > > follow, in order to ensure interoperability. For example, GISB
> > has already
> > > defined an AS2 interoperability profile and the New York
> > Collaborative, in
> > > accordance with the Public Service Commission regulations, is
> > in the process
> > > of defining their interoperability profile. I'm familiar with both these
> > > groups and the process used to develop their profiles. I could help HL7
> > > develop an AS2 interoperability profile, if the group decides
> > to pursue this
> > > approach.
> > >
> > > Regards,
> > >
> > > Dick Brooks
> > > Group 8760
> > > 110 12th Street North
> > > Birmingham, AL 35203
> > > dick@xxxxxxxx
> > > 205-250-8053
> > > Fax: 205-250-8057
> > > http://www.8760.com/
> > >
> > > InsideAgent - Empowering e-commerce solutions
> > >
> > > > -----Original Message-----
> > > > From: Rishel,Wes [mailto:wes.rishel@xxxxxxxxxxx]
> > > > Sent: Friday, November 17, 2000 8:32 PM
> > > > To: 'dick@xxxxxxxx'; Gunther Schadow
> > > > Cc: Rik Drummond; Kepa Zubeldia; CLEM; Gary Crough; Beth Morrow;
> > > > David@Drummondgroup. Com; GISB1@xxxxxxx; ietf-ediint@xxxxxxx
> > > > Subject: HL7 Standards Process (was RE: EDIINT and HIPAA)
> > > >
> > > >
> > > > As the chair-elect of HL7 I would like to respond to DB's
> > > > question about HL7
> > > > process.
> > > >
> > > > HL7 has two kinds of specifications that are published using slighly
> > > > different processes: a Standard is submitted to ANSI for
> > > > certification once
> > > > it has passed ballot; a Recommendation is published by HL7 but is not
> > > > submitted to ANSI and does not become an ANSI standard. Some
> > > > Recommendations
> > > > have had substantial acceptance among the HL7 community,
> > including it's
> > > > "lower level protocols" which define ways to reliably pass
> > > > discrete messages
> > > > over RS-232 and TCP, and were published sometime in the early 1990s.
> > > >
> > > > A Standard originates under the sponsorship of a Technical
> > > > Committee. If HL7
> > > > were to create a Standard for EDIINT it would be the Control/Query
> > > > committee. It is balloted at the committee level. (Actually anyone can
> > > > participate in the committee ballot, but in practice those who
> > > > choose to do
> > > > so are usually those who participate in, or follow the work of, the
> > > > Technical Committee.) When it passes a committee level ballot it is
> > > > submitted for ballot by the full HL7 Working Group (which is
> > the entire
> > > > organization). If it passes at this level it is automatically
> > submitted to
> > > > ANSI for certification. The ANSI review allows time for public
> > > > comment, but
> > > > it is primarily a certification that the process was fair and
> > consistent
> > > > with our bylaws. To date, have never had an issue arise that
> > prevented or
> > > > delayed the certification process.
> > > >
> > > > In addition to Technical Committees HL7 has Special Interest
> > > > Groups. Gunther
> > > > is co-chair of our SIG on security. Strictly speaking, a SIG
> > > > cannot initiate
> > > > the balloting of a standard; but SIGs can prepare such a document, and
> > > > obtain the consent of a Technical Committee which sponsors the ballot.
> > > >
> > > > The other kind of document, the Recommendation, is easier to
> > get out the
> > > > door. It can be originated by a SIG, and it has only one level of
> > > > balloting.
> > > > The majority that is required to pass a Recommendation is
> > less severe than
> > > > the majority required to pass a Standard (67% vs. 90%).
> > > >
> > > > Ballots are conducted using the Web. Assuming that both
> > ballots pass an
> > > > energetic committee can easily complete the entire process in
> > two of our
> > > > three-per-year Working Group meetings (roughly 8 months
> > elapsed time). (Of
> > > > course most committees have substantial time invested in debating the
> > > > document before it begins the process.)
> > > >
> > > > Most of the meetings required at certain points in the process can be
> > > > handled using conference calls; in theory a REALLY motivated
> > > > committee could
> > > > accomplish the two-level ballot in five months and then wait
> > about three
> > > > months for ANSI certication. (That is a theoretical figure
> > that has never
> > > > been realized in practise.)
> > > >
> > > > Recommendations can be passed in roughly four months.
> > > >
> > > > Best regards,
> > > >
> > > > Wes Rishel
> > > > Research Director
> > > > Healthcare Industry Research & Advisory Services
> > > > GartnerGroup
> > > > Alameda, CA
> > > > Client inquiries: call +1-203-316-1288 or email to indapps@xxxxxxxxxxx
> > > > wes.rishel@xxxxxxxxxxx
> > > > 510 522 8135
> > > > 510 521 2423 (fax)
> > > >
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Dick Brooks [mailto:dick@xxxxxxxx]
> > > > > Sent: Thursday, November 02, 2000 10:27 AM
> > > > > To: Gunther Schadow
> > > > > Cc: Rik Drummond; Kepa Zubeldia; CLEM; Gary Crough; Beth Morrow;
> > > > > David@Drummondgroup. Com; GISB1@xxxxxxx; ietf-ediint@xxxxxxx; Dick
> > > > > Brooks
> > > > > Subject: RE: EDIINT and HIPAA
> > > > >
> > > > >
> > > > >
> > > > > <DB> I'm not familiar with the HL7 standards process, all of
> > > > > my experience
> > > > > has been with IETF, DISA, GISB and recently ebXML. Each of these
> > > > > organizations has a different process for developing
> > standards. If we
> > > > > brought AS2 to HL7 today, how long would it take to become an
> > > > > ANSI standard?
> > > > > I would like to read HL7's operational process document, can
> > > > > you provide a
> > > > > pointer?
> > > > > </DB>
> > > > >
> >
> >

begin:vcard 
n:Schadow;Gunther
tel;fax:+1 317 630 6962
tel;home:+1 317 816 0516
tel;work:+1 317 630 7960
x-mozilla-html:FALSE
url:http://aurora.rg.iupui.edu
org:Regenstrief Institute for Health Care
adr:;;1050 Wishard Blvd;Indianapolis;Indiana;46202;USA
version:2.1
email;internet:gschadow@xxxxxxxxxxxxxxx
title:M.D., Medical Information Scientist
note;quoted-printable:Al oppinions expressed in this message are my own and do =0D=0Anot necessarily represent those of the Regenstrief Institute.
fn:Gunther Schadow
end:vcard