RE: AS2 XML requirements (was Re: HL7 Standards Process)

["Dick Brooks" <dick@xxxxxxxx>]

Kit,

The original EDIINT AS1 draft was restricted to supporting RFC1767 payload
types only.

AS2 is payload neutral which means it will transport XML, X12, as well an
any other IANA registered MIME media type. AS2 is explicit in this regard
ref: this excerpt from the AS2 specification:

    "In general, both HTTP servers and HTTP clients handling the message
    templates of [AS1] should be prepared to process these basic EDIINT
    data formats when they are embedded within MIME multiparts.

    In addition to the enveloping and MIME media type options defined in
    sections 4.2.x and 4.3.x of "MIME-based Secure EDI" [AS1], this
    specification enables the transport of payload objects containing
    other MIME media types. Implementors are to follow the
    appropriate specifications identified under "References"
    in [MIME-TYPES], for the type of object being transmitted.
    For example, to send an XML object, the MIME media type
    of application/xml is used in the Content-type MIME header
    and the specifications  for enveloping the object are contained in
    [XMLTYPES]; for example:

        Content-type: application/xml; charset="utf-8" "


Dick Brooks
Group 8760
110 12th Street North
Birmingham, AL 35203
dick@xxxxxxxx
205-250-8053
Fax: 205-250-8057
http://www.8760.com/

InsideAgent - Empowering e-commerce solutions

> -----Original Message-----
> From: Kit (Christopher) Lueder [mailto:kit@xxxxxxxxx]
> Sent: Wednesday, November 22, 2000 10:06 AM
> To: Rishel,Wes
> Cc: 'Kepa Zubeldia'; Dick Brooks; Gunther Schadow; Rik Drummond; CLEM;
> Gary Crough; Beth Morrow; David@Drummondgroup. Com; GISB1@xxxxxxx;
> ietf-ediint@xxxxxxx
> Subject: AS2 XML requirements (was Re: HL7 Standards Process)
>
>
> No! XML must be accommodated in EDIINT! I was figuring XML content would
> be carried as edi-consent, but that seems like a back-door fix rather
> than a happy solution.
>
> This sounds like Wes has raised a new requirement that should be
> considered in the AS2 spec (and maybe AS1?). I do consider XML to be a
> type of EDI, since both are computer-processable electronic
> representations of business transactions, so I request we add a type of
> edi-xml. And I request we add an attribute/field that indicates the kind
> of XML document ("semantic standard") being carried in the payload.
> Kit Lueder,
> MITRE.
>
> "Rishel,Wes" wrote:
> >
> > I doubt if XML will ever be a meaningful content type for EDIINT. Saying
> > that the content is HL7, X12, or NCPDP implies the availability of a
> > semantic interpretation of the payload. This would be true whether the
> > payload was in the current HL7, X12, or NCPDP syntaxes or in
> the particular
> > applications of XML that they may adopt.
> >
> > If the only claim is that the payload is XML there is no such
> linkage to a
> > semantic standard, even if the XML instance contains a pointer
> to a schema
> > in a repository somewhere. A schema is far less than a semantic
> > representation of the instance; it simplify enables a better and more
> > thorough parsing of the message.
> >
> > > -----Original Message-----
> > > From: Kepa Zubeldia [mailto:Kepa.Zubeldia@xxxxxxxxxxx]
> > > Sent: Tuesday, November 21, 2000 2:52 PM
> > > To: dick@xxxxxxxx
> > > Cc: Rishel,Wes; Gunther Schadow; Rik Drummond; CLEM; Gary Crough; Beth
> > > Morrow; David@Drummondgroup. Com; GISB1@xxxxxxx; ietf-ediint@xxxxxxx
> > > Subject: Re: HL7 Standards Process (was RE: EDIINT and HIPAA)
> > >
> > >
> > > Dick,
> > >
> > > Probably the requirements are identical, except that the
> > > content will be
> > > in X12 or NCPDP syntax instead of HL7 or XML.
> > >
> > > Kepa
> > >
> > > Dick Brooks wrote:
> > > >
> > > > Kepa,
> > > >
> > > > > Are you volunteering to create an interoperability
> > > profile for digital
> > > > > signatures of the HIPAA standard transactions ?
> > > >
> > > > My offer to assist in the development of an
> > > interoperability profile was in
> > > > response to a need identified within HL7. However, I would
> > > be willing to
> > > > help the HIPAA folks create an interoperability profile,
> > > provided it's based
> > > > on a technology that I'm familiar with (e.g. EDIINT AS2,
> > > GISB EDM, ebXML).
> > > >
> > > > I would hope the investment in developing an
> > > interoperability profile for
> > > > HL7 could be leveraged in other areas (e.g. HIPAA, ASTM),
> > > without any
> > > > additional work. Do you see HIPAA's requirements being significantly
> > > > different enough from HL7 to require a separate
> > > interoperability profile?
> > > >
> > > > Thanks,
> > > >
> > > > Dick Brooks
> > > > Group 8760
> > > > 110 12th Street North
> > > > Birmingham, AL 35203
> > > > dick@xxxxxxxx
> > > > 205-250-8053
> > > > Fax: 205-250-8057
> > > > http://www.8760.com/
> > > >
> > > > InsideAgent - Empowering e-commerce solutions
> > > >
> > > > > -----Original Message-----
> > > > > From: Kepa Zubeldia [mailto:Kepa.Zubeldia@xxxxxxxxxxx]
> > > > > Sent: Monday, November 20, 2000 6:13 PM
> > > > > To: Dick Brooks
> > > > > Cc: Rishel,Wes; Gunther Schadow; Rik Drummond; CLEM; Gary
> > > Crough; Beth
> > > > > Morrow; David@Drummondgroup. Com; GISB1@xxxxxxx;
> > > ietf-ediint@xxxxxxx
> > > > > Subject: Re: HL7 Standards Process (was RE: EDIINT and HIPAA)
> > > > >
> > > > >
> > > > > Dick,
> > > > >
> > > > > Are you volunteering to create an interoperability
> > > profile for digital
> > > > > signatures of the HIPAA standard transactions ?  X12,
> > > NCPDP, and X12+HL7
> > > > > (in which the signature could be on the HL7 or on the X12
> > > components)
> > > > > are the immediate needs.  However, keep in mind that
> > > NCPDP could also be
> > > > > in EDIFACT syntax (e.g. prescriptions) and HL7 could be
> > > in different
> > > > > syntaxes.  But, for HIPAA purposes, at this time we need
> > > something for
> > > > > the 275 attachment only.  Other HL7 messages could come
> > > later through
> > > > > other interoperability profiles.
> > > > >
> > > > > If we have a very narrow scope (HIPAA transactions as
> > > they were released
> > > > > in the Final Rule, plus attachments as we know them) then
> > > it is possible
> > > > > to get an agreement, even if there is not yet an
> > > agreement on other
> > > > > issues or on PKI issues.
> > > > >
> > > > > Other volunteers ?
> > > > >
> > > > > Kepa
> > > > >
> > > > > Dick Brooks wrote:
> > > > > >
> > > > > > Thanks Wes.
> > > > > >
> > > > > > Based on your description I would anticipate the EDIINT AS2
> > > > > spec taking the
> > > > > > "Recommendation" route, IF the group decides to go forward. Do
> > > > > you see it
> > > > > > the same way?
> > > > > >
> > > > > > FYI - other groups that have adopted AS2 have found it
> > > > > necessary to define
> > > > > > "interoperability profiles". These profiles identify
> > > the exact set of
> > > > > > "options" from AS2 that everyone in the "trading
> > > community" agrees to
> > > > > > follow, in order to ensure interoperability. For example, GISB
> > > > > has already
> > > > > > defined an AS2 interoperability profile and the New York
> > > > > Collaborative, in
> > > > > > accordance with the Public Service Commission regulations, is
> > > > > in the process
> > > > > > of defining their interoperability profile. I'm
> > > familiar with both these
> > > > > > groups and the process used to develop their profiles.
> > > I could help HL7
> > > > > > develop an AS2 interoperability profile, if the group decides
> > > > > to pursue this
> > > > > > approach.
> > > > > >
> > > > > > Regards,
> > > > > >
> > > > > > Dick Brooks
> > > > > > Group 8760
> > > > > > 110 12th Street North
> > > > > > Birmingham, AL 35203
> > > > > > dick@xxxxxxxx
> > > > > > 205-250-8053
> > > > > > Fax: 205-250-8057
> > > > > > http://www.8760.com/
> > > > > >
> > > > > > InsideAgent - Empowering e-commerce solutions
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Rishel,Wes [mailto:wes.rishel@xxxxxxxxxxx]
> > > > > > > Sent: Friday, November 17, 2000 8:32 PM
> > > > > > > To: 'dick@xxxxxxxx'; Gunther Schadow
> > > > > > > Cc: Rik Drummond; Kepa Zubeldia; CLEM; Gary Crough;
> > > Beth Morrow;
> > > > > > > David@Drummondgroup. Com; GISB1@xxxxxxx; ietf-ediint@xxxxxxx
> > > > > > > Subject: HL7 Standards Process (was RE: EDIINT and HIPAA)
> > > > > > >
> > > > > > >
> > > > > > > As the chair-elect of HL7 I would like to respond to DB's
> > > > > > > question about HL7
> > > > > > > process.
> > > > > > >
> > > > > > > HL7 has two kinds of specifications that are
> > > published using slighly
> > > > > > > different processes: a Standard is submitted to ANSI for
> > > > > > > certification once
> > > > > > > it has passed ballot; a Recommendation is published
> > > by HL7 but is not
> > > > > > > submitted to ANSI and does not become an ANSI standard. Some
> > > > > > > Recommendations
> > > > > > > have had substantial acceptance among the HL7 community,
> > > > > including it's
> > > > > > > "lower level protocols" which define ways to reliably pass
> > > > > > > discrete messages
> > > > > > > over RS-232 and TCP, and were published sometime in
> > > the early 1990s.
> > > > > > >
> > > > > > > A Standard originates under the sponsorship of a Technical
> > > > > > > Committee. If HL7
> > > > > > > were to create a Standard for EDIINT it would be the
> > > Control/Query
> > > > > > > committee. It is balloted at the committee level.
> > > (Actually anyone can
> > > > > > > participate in the committee ballot, but in practice those who
> > > > > > > choose to do
> > > > > > > so are usually those who participate in, or follow
> > > the work of, the
> > > > > > > Technical Committee.) When it passes a committee
> > > level ballot it is
> > > > > > > submitted for ballot by the full HL7 Working Group (which is
> > > > > the entire
> > > > > > > organization). If it passes at this level it is automatically
> > > > > submitted to
> > > > > > > ANSI for certification. The ANSI review allows time for public
> > > > > > > comment, but
> > > > > > > it is primarily a certification that the process was fair and
> > > > > consistent
> > > > > > > with our bylaws. To date, have never had an issue arise that
> > > > > prevented or
> > > > > > > delayed the certification process.
> > > > > > >
> > > > > > > In addition to Technical Committees HL7 has Special Interest
> > > > > > > Groups. Gunther
> > > > > > > is co-chair of our SIG on security. Strictly speaking, a SIG
> > > > > > > cannot initiate
> > > > > > > the balloting of a standard; but SIGs can prepare
> > > such a document, and
> > > > > > > obtain the consent of a Technical Committee which
> > > sponsors the ballot.
> > > > > > >
> > > > > > > The other kind of document, the Recommendation, is easier to
> > > > > get out the
> > > > > > > door. It can be originated by a SIG, and it has only
> > > one level of
> > > > > > > balloting.
> > > > > > > The majority that is required to pass a Recommendation is
> > > > > less severe than
> > > > > > > the majority required to pass a Standard (67% vs. 90%).
> > > > > > >
> > > > > > > Ballots are conducted using the Web. Assuming that both
> > > > > ballots pass an
> > > > > > > energetic committee can easily complete the entire process in
> > > > > two of our
> > > > > > > three-per-year Working Group meetings (roughly 8 months
> > > > > elapsed time). (Of
> > > > > > > course most committees have substantial time invested
> > > in debating the
> > > > > > > document before it begins the process.)
> > > > > > >
> > > > > > > Most of the meetings required at certain points in
> > > the process can be
> > > > > > > handled using conference calls; in theory a REALLY motivated
> > > > > > > committee could
> > > > > > > accomplish the two-level ballot in five months and then wait
> > > > > about three
> > > > > > > months for ANSI certication. (That is a theoretical figure
> > > > > that has never
> > > > > > > been realized in practise.)
> > > > > > >
> > > > > > > Recommendations can be passed in roughly four months.
> > > > > > >
> > > > > > > Best regards,
> > > > > > >
> > > > > > > Wes Rishel
> > > > > > > Research Director
> > > > > > > Healthcare Industry Research & Advisory Services
> > > > > > > GartnerGroup
> > > > > > > Alameda, CA
> > > > > > > Client inquiries: call +1-203-316-1288 or email to
> > > indapps@xxxxxxxxxxx
> > > > > > > wes.rishel@xxxxxxxxxxx
> > > > > > > 510 522 8135
> > > > > > > 510 521 2423 (fax)
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Dick Brooks [mailto:dick@xxxxxxxx]
> > > > > > > > Sent: Thursday, November 02, 2000 10:27 AM
> > > > > > > > To: Gunther Schadow
> > > > > > > > Cc: Rik Drummond; Kepa Zubeldia; CLEM; Gary Crough;
> > > Beth Morrow;
> > > > > > > > David@Drummondgroup. Com; GISB1@xxxxxxx;
> > > ietf-ediint@xxxxxxx; Dick
> > > > > > > > Brooks
> > > > > > > > Subject: RE: EDIINT and HIPAA
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > <DB> I'm not familiar with the HL7 standards process, all of
> > > > > > > > my experience
> > > > > > > > has been with IETF, DISA, GISB and recently ebXML.
> > > Each of these
> > > > > > > > organizations has a different process for developing
> > > > > standards. If we
> > > > > > > > brought AS2 to HL7 today, how long would it take to
> > > become an
> > > > > > > > ANSI standard?
> > > > > > > > I would like to read HL7's operational process document, can
> > > > > > > > you provide a
> > > > > > > > pointer?
> > > > > > > > </DB>
> > > > > > > >
> > > > >
> > > > >
> > >
>
> --
>     _/    _/             Kit C. J. Lueder
>    _/   _/         _/   The MITRE Corp.         Tel:  703-883-5205
>   _/_/_/    _/  _/_/_/ 1820 Dolley Madison Bl  Cell: 703-577-2463
>  _/   _/   _/    _/   Mailstop W658           FAX:  703-883-3383
> _/    _/  _/    _/   McLean, VA 22102        Mail: kit@xxxxxxxxx
> Worse than an unanswered question is an unquestioned answer.
>